1 4 4

: Samsung I900 0 2 . .

  1. #1

    30.09.2006
    ,
    11
    0
    : 0 0 ()
    0

    Samsung I900 0 2 . .

    .

    I900. , - .

    PDA Mdem Part , :

    PDA Part:

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.34
    Selected Resurrector: [Samsung i900 PDA]

    Connecting to the dead body...OK
    Detected dead body ID: 0x2E649013 - CORRECT!
    Set I/O Voltage reads as 3.31V, TCK Frequency is 4 MHz

    Resurrection sequence started.
    Establish communication with the phone...OK
    Initializing internal hardware configuration...OK
    Uploading resurrector data into memory...OK
    Starting communication with resurrector...OK

    Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB)
    Flashing the dead body...
    WARNING: Programming Error (0x24) at 0x0000080000 is Ignored.OK
    Resurrection complete!

    Modem Part:

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0x2E649013 - CORRECT!
    Set I/O Voltage reads as 3.31V, TCK Frequency is 10 MHz
    Initializing internal hardware configuration...OK

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0xA00C00E1 - CORRECT!
    Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz

    Resurrection sequence started.
    Establish communication with the phone...OK
    Uploading resurrector data into memory...OK
    Starting communication with resurrector...OK

    Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB)
    Flashing the dead body...OK
    Resurrection complete!
    PDA 50% c : , .

    , , . :-) - - . . , ?

    , . - . ? ( )

    - . PDA , , .:
    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0x2E649013 - CORRECT!
    Set I/O Voltage reads as 3.30V, TCK Frequency is 10 MHz
    Initializing internal hardware configuration...OK

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0xA00C00E1 - CORRECT!
    Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz

    Resurrection sequence started.
    Establish communication with the phone...OK
    Uploading resurrector data into memory...OK
    Starting communication with resurrector...FAILED
    ERROR: Wrong DCC data checksum.

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0xA00C00E1 - CORRECT!
    Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz

    Resurrection sequence started.
    Establish communication with the phone...OK
    Uploading resurrector data into memory...OK
    Starting communication with resurrector...FAILED
    ERROR: Wrong DCC data checksum.

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.26, JTAG Manager Version: 1.25
    Selected Resurrector: [Samsung i900 Modem]

    Connecting to the dead body...OK
    Detected dead body ID: 0xA00C00E1 - CORRECT!
    Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz

    Resurrection sequence started.
    Establish communication with the phone...OK
    Uploading resurrector data into memory...FAILED
    ERROR: Memory access timed out.
    ... . , , ? .. , - , . - .

    , Phone . , - .

    - :-)
    ivangnr; 03.08.2011 12:57.

  2. #2
      RomkaGSM
    07.06.2011
    ,
    34
    21
    0
    : 0 0 ()
    0
    Uploading resurrector data into memory...FAILED
    ERROR: Memory access timed out. - i450. , . Resurrection. ...

  3. #3
      segacool
    19.09.2005
    29
    96
    0
    : 0 0 ()
    1
    .
    , .
    ,

  4. #4

,

: 1 (: 0 , : 1)

  •  
   Rambler's Top100 PageRank Checking Icon