Что нового

Dell Optiplex 745 almost dead, only Power led on mobo lights

SIO : SCH5504-NS - Datasheet seems not to be available on the net.

Voltages measured :
Fnt_panel ICH_PWRBTN : 0V instead of +3V to be released by SB
RSMRST =+3.2v, clock signal is ok and supply voltage =+3.3V_AUX
PWR_PS_ON (green wire)=+4.9V
+5VSB ok

Based on SCH5514-NS datasheet available, which seems to be same as SCH5504-NS,
slp_s3 (pin123) and slp_s4 (pin124) measured +3.2V, when only PSU is plugged. It should be +0V, before pushing power button.

When I shunted green wire to gnd continiously, computer boots and displays.

Any help as where to dig further to fix Dell issue.
Wonder whether SB needs replacement.
 

Кто читал эту тему (всего: 1) Детально

Верх Низ