See the top rated post in this thread. Click here

1 6 6

: KLM8G1WEMB + firmware

  1. #1

    20.03.2018
    ,
    29
    10
    0
    : 0 0 ()
    0


    Question KLM8G1WEMB + firmware

    KLM8G1WEMB, , - .
    bootloader - .
    ! MBR - .
    :
    :
    Setting interface to EasyJtag2/E-Socket
    Setting bus width to 8 Bit
    Setting frequence to 14 Mhz
    EMMC Device Information :
    EMMC CID: 15010038574D4233520033586476410F
    EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
    EMMC Manufacture : SAMSUNG , EMMC NAME: 8WMB3R , HEX: 38574D423352 , S/N: 33586476 , rev. 0x00
    EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2014
       EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
       EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
       EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD Information :
    Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
    Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
    Boot Bus Config: 0x00 , width 1bit
    H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
    Supported partition features [PARTITIONING_SUPPORT]: 0x07
    Device supports partitioning features
    Device can have enhanced technological features in partitions and user data area
    Device can have extended partitions attribute
    Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
    Backup saved: 8WMB3R_33586476_20180602_202427.extcsd
    EMMC Init completed.
    
    Get firmware version
    Firmware info not found
    MBR:
    :
    Setting interface to EasyJtag2/E-Socket
    Setting bus width to 8 Bit
    Setting frequence to 14 Mhz
    EMMC Device Information :
    EMMC CID: 15010038574D4233520033586476410F
    EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
    EMMC Manufacture : SAMSUNG , EMMC NAME: 8WMB3R , HEX: 38574D423352 , S/N: 33586476 , rev. 0x00
    EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2014
       EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
       EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
       EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD Information :
    Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
    Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
    Boot Bus Config: 0x00 , width 1bit
    H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
    Supported partition features [PARTITIONING_SUPPORT]: 0x07
    Device supports partitioning features
    Device can have enhanced technological features in partitions and user data area
    Device can have extended partitions attribute
    Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
    Backup saved: 8WMB3R_33586476_20180602_202553.extcsd
    EMMC Init completed.
    
    Operation: Write by vendor (MediaTek)
    
    Partition name: MBR
    Filename: MBR , Offset: 000000600000 , filesize: 512 bytes
    eMMC switching to ROM1
    Erasing partition...
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #1
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #2
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #3
    Too many errors. Erasing has been stopped
    firmware :
    Confirm , Advanced Mode - .
        . 

:	Screenshot_1.png 
:	30 
:	397.1  
ID:	306664
    :
    :
    Compression if OFF
    
    Z3X EasyJtag Software ver. 2.9.0.3
    Loading eMMC GEN2 Firmware... IO: 2800 mV
    Initial pull results:
      clock: 1716mV pin connected ok
      command: 1724mV pin connected ok
      data0: 1727mV pin connected ok
      data1: 1726mV pin connected ok
      data2: 1727mV pin connected ok
      data3: 1726mV pin connected ok
      data4: 1726mV pin connected ok
      data5: 1724mV pin connected ok
      data6: 1729mV pin connected ok
      data7: 1728mV pin connected ok
    Box S/N: 4A6BA71728B93687, ,FW Ver.: 02.23
    Box IO Level:2800 mV
    CLK Rate:42000 kHz
    Bus Width:8bit,SDR
    HiPower mode is off!
    ---------- eMMC Device Information ----------
    
    EMMC CID : 15010038574D4233520033586476410F
    EMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
    EMMC Manufacturer ID: 0015 , OEM ID: 0100
    EMMC Date: 04/2014  Rev.0x0
    EMMC NAME: 8WMB3R , S/N:  861430902
    EMMC NAME (HEX): 38574D42335200 
    EMMC ROM1 (Main User Data)   Capacity: 7456 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    EMMC Password Locked: No
      Extended CSD rev 1.7 (MMC 5.0)
    Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
    Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x48.
    H/W reset function [RST_N_FUNCTION]: 0x01
    High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
    Partitioning Support [PARTITIONING_SUPPORT]: 0x07
     Device support partitioning feature
     Device can have enhanced tech.
    Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
    ---------------------------------------------
    Backup saved: 8WMB3R_ 861430902_20180602_2031.extcsd
    Partition table scan:
     GPT: not present
    Done.
    
    Running:SAMSUNG: eMMC firmware update...
    EMMC NAME: 8WMB3R
    Operation cancelled by user!

  2. #2
      andrei_d1978
    09.05.2009
    ,
    798
    786
    : 515 293 ()
    3
    1


    1 1 .
    KLM8G1WEMB-B031

  3. #3

    20.03.2018
    ,
    29
    10
    0
    : 0 0 ()
    0


    andrei_d1978
    KLM8G1WEMB-B031
    , ! -=(
    =(
    :
    Partition name: PRELOADER
    Filename: preloader_htt89_tb_jb2.bin , Offset: 000000000000 , filesize: 122260 bytes
    eMMC switching to ROM2
    Erasing partition...
    Writing partition...
    Done writing partition. Write speed: 1603,70 KB/s
    Partition name: MBR
    Filename: MBR , Offset: 000000600000 , filesize: 512 bytes
    eMMC switching to ROM1
    Erasing partition...
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #1
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #2
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #3
    Too many errors. Erasing has been stopped
    aykalinichenko; 03.06.2018 13:31.

  4. #4
      Angel81
    28.10.2006
    ,
    37
    366
    10
    : 9 9 ()
    4
    1


    aykalinichenko
    , ! -=(
    =(
    :
    Partition name: PRELOADER
    Filename: preloader_htt89_tb_jb2.bin , Offset: 000000000000 , filesize: 122260 bytes
    eMMC switching to ROM2
    Erasing partition...
    Writing partition...
    Done writing partition. Write speed: 1603,70 KB/s
    Partition name: MBR
    Filename: MBR , Offset: 000000600000 , filesize: 512 bytes
    eMMC switching to ROM1
    Erasing partition...
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #1
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #2
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #3
    Too many errors. Erasing has been stopped
    3.3 , emmc 1.8. .
    Windows , Linux - .

  5. #5

    20.03.2018
    ,
    29
    10
    0
    : 0 0 ()
    0


    Angel81
    3.3 , emmc 1.8. .
    .

  6. #6
    Z3X EasyJTAG
    27.08.2006
    ,
    989
    69
    : 1,573 461 ()
    1


    aykalinichenko
    , ! -=(
    =(
    :
    Partition name: PRELOADER
    Filename: preloader_htt89_tb_jb2.bin , Offset: 000000000000 , filesize: 122260 bytes
    eMMC switching to ROM2
    Erasing partition...
    Writing partition...
    Done writing partition. Write speed: 1603,70 KB/s
    Partition name: MBR
    Filename: MBR , Offset: 000000600000 , filesize: 512 bytes
    eMMC switching to ROM1
    Erasing partition...
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #1
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #2
    Error erasing at address: 000000600000 , error: -3, DATA RCV Timeout Error ... Retry #3
    Too many errors. Erasing has been stopped
    . , 6 6589, 4-4-4, .
    . " "

    http://www.gsmforum.ru/threads/30065...8%E1%EA%E8+mtk

    , EasyJTAG . , .
    Layder; 08.06.2018 00:09.
    - Webmoney: Z293647090925, R137502940285, U155823692175

,

: 1 (: 0 , : 1)

  1. : 0
    : 17.07.2013, 06:00
  2. Firmware version: 0118.02 0.1.20
    igor_06 Infinity Box
    : 4
    : 11.11.2012, 23:55
  3. : 0
    : 02.06.2012, 11:00
  4. : 2
    : 19.02.2012, 16:19
  5. Firmware 01.21.
    skorb CycloneBox Nokia
    : 20
    : 06.03.2010, 22:45

  •  
   Rambler's Top100 PageRank Checking Icon .